optical sorting machine for fasteners, optical sorting machine for screws, optical sorting machine for auto parts, optical sorting machine for nuts, optical sorting machine for washers, optical sorting machine for bolts, optical sorting machine for rivets, optical sorting machine for sleeves, optical sorting machine for spacers, optical sorting machine for studs, optical sorting machine for pins optical sorting machine for inserts, optical sorting machine for molding inserts, optical sorting machine for electrical terminals, optical sorting machine for electrical connectors, optical sorting machine for plastic parts, optical sorting machine for aeronautical parts, optical sorting machine for rubber balls, optical sorting machine for o rings, optical sorting machine for copper seams, optical sorting machine for springs, optical sorting machine for precious parts, optical sorting machine for turning parts, optical sorting machine for custom parts, optical sorting machine for special parts, optical sorting machine for forging parts, optical sorting machine for bearing cages, optical sorting machine for cable glands, optical sorting machine for cable accessories, optical sorting machine for wing nuts, optical sorting machine for cap nuts, optical sorting machine for hex nuts, optical sorting machine for cross dowels, optical sorting machine for flange nuts, optical sorting machine for square nuts, optical sorting machine for weld nuts, optical sorting machine for wedge nuts, optical sorting machine for dome nuts, optical sorting machine for plain washers, optical sorting machine for spring washers, optical sorting machine for locking washers, optical sorting machine for csk washers, optical sorting machine for circlips, optical sorting machine for rubber seals, optical sorting machine for tapered section rings, optical sorting machine for constant section rings, optical sorting machine for spiral retaining rings, optical sorting machine for o retaining rings, optical sorting machine for automotive parts, optical sorting machine for iron inserts, optical sorting machine for brass inserts, optical sorting machine for threaded inserts optical sorting machine for cross knurling inserts, optical sorting machine for parallel knurling inserts, optical sorting machine for bullets, optical sorting machine for cartridges, optical sorting machine for cartridge case, optical sorting machine for bullet jacket cup optical sorting machine for ammunition, Laser,Laser Marking, Laser Welding, Solar Cell Scribing,Fiber Laser Marking, Diamond planner, Laser Diamond,Sawing, Laser Diamond Bruting, Laser Diamond Blocking, Diamond Cross Bar,SPM machine,Machine Software, Electronics, Package, Ahmedabad,Surat,Gujarat India
Home  |  SiteMap  |   Contact Us  
Laser Marking Machine 3D Laser Engraving Co2 Laser Marking Machine UV Laser Marking Machine Green Laser Marker

PCB Drilling and Routing Machine

 

PCB Drilling Features:

  • Gantry type strong machine.
  • Programming in g code standard. Other modes optional.
  • PCB drilling and routing machine supports to open OrCad & Protel software file for drilling and routing.
  • Plt,Basic Dxf file support for PCB Routing.
  • PCB drilling and routing machine software supports programming facility from existing job.
  • Very good strength for PCB routing.
  • Auto vacuum suction for chip removal.
  • Full proof clamping arrangement.
  • Step and repeat for multi pasting .
  • Simulation facility for PCB drilling and Routing.
  • Drill sequence designer/ editor .
  • Industries, laboratories and educational institutes.
  • PCB drilling and routing machine software supports Pattern edit facility.
  • Developed software as per indian market requirement
  • Run on Very High Speed FPGA based Motion Control Card and other controller
  • User Friendly

 

Highlights:

  • High efficiency: It merely needs a few minutes to make a piece of PCB.
  • Accuracy: The min error of numerical control drill hole less than 1mil (0.025mm).
  • Automatism and convenience: Simple software hardware installation, operate the manufacturing process by striking the function keys of operation system.

 

PCB Drilling optional

  • Multi spindle attachment.
  • Granite based table.
  • CCTV camera & monitor.
  • Auto tool height setting.
  • Vacuum system for dust collection.

 

Technical Specification

 

Description Parameter
X,Y,Z working area 600 mm × 400 mm × 50 mm(optional)
Max. speed 6000 mm/min
Spindle Dual spindle/Single spindle (optional)
Spindle speed 24000 RPM/ up to 200000 RPM (optional)
Working voltage AC 230v/50Hz
Operating system WINDOWS XP/7
Software PCBDrilling
Repeatability <0.003 mm
Resolution 1 µ
Position accuracy 0.03 mm over travel of 300 mm
Drilling Speed 2400 mm/min
Tool Changer Manual / Automatic (optional)

  Keyword:  PCB Drilling, PCB Drilling and Routing,PCB Drilling and Routing machine,Dual spindle cnc pcb router,Dual spindle cnc pcb driller and router,PCB Drilling Manufacturer, PCB Drilling Manufacturer in India, Manufacturer, supplier and Exporter of PCB Drilling and Routing Machine offered by Vision Embesoft Solution Ahmedabad, Gujarat , India

PCB Drilling and Routing
Click here to view full image

 

laser marking system,laser marking machine,send enquiry

Contact us +91 7575806266    Email : sales@vesindia.org, bhavesh.pethani@gmail.com

          |  Home | Business Profile |  Products | Blog |  News | SiteMap |  Contact Us |  About Us 

  Head Office :B-106, Electronic Estate, G.I.D.C, Near K-6,Sector - 25, Gandhinagar - 382024, Ahmedabad,Gujarat, INDIA.               

  (Branch Office - Dev Diamond Solution): 47 - Sagar Industrial Estate, Near Kiran Hospital, Vastadevadi Road, Katargam, Surat-395004, Gujarat, INDIA.               

Copyright © 2008-2023 Vision. All Rights Reserved. Designed by Vision Embesoft Solution